EU PVSEC Programme Online
EU PVSEC 2021, 6 - 10 September 2021
Session: 2CV.1 Characterisation and Manufacturing of Crystalline Silicon Solar Cells
Type: Visual
Date: Wednesday, 8th September 2021
08:30 - 10:00
Event: Conference Conference
Topic: 2. Silicon Materials and Cells
2CV.1.1 Comparing Optical Performance of a Wide Range of Perovskite/Silicon Tandem Architectures under Real-World Conditions
M. Singh, Delft University of Technology, Delft, Netherlands
2CV.1.2 The Empirical Digital Twin: Representation Learning on Solar Cell Images and Efficient Defect Detection with Human-in-the-Loop
P. Kunze, Fraunhofer ISE, Freiburg, Germany
2CV.1.3 3D Finite Element Modelling of Micro Transfer Length Measurements in Contact Layers for Silicon Solar Cells Using Multiphysics Simulation
S. Lange, Fraunhofer CSP, Halle (Saale), Germany
2CV.1.4 “Do Not Blame the Butter for What the Bread Did” or How the Optical Properties of IBC Solar Cells Affect the Results of Spatially Resolved Characterization Methods
M. Kikelj, University of Ljubljana, Ljubljana, Slovenia
2CV.1.5 Quantitative Contactless Determination of the Series Resistance of Silicon Solar Cells
H. Höffler, Fraunhofer ISE, Freiburg, Germany
2CV.1.6 Spectroscopic Inline Characterisation of Partially Processed Epi Wafers after Porosification
S. Al-Hajjawi, Fraunhofer ISE, Freiburg, Germany
2CV.1.7 Numerical Simulation and Experimental Characterization of c-Si Cells Mechanical Limits in Double Curvature Shape
T. Duigou, CEA, Grenoble, France
2CV.1.8 Determination of Effect of Laser Cutting Method on the Performance of Bifacial PERC Cells
M. Çetmeli, Kalyon PV, Ankara, Turkey
2CV.1.9 Edge Recombination Influence on SHJ Voc
F. Menchini, ENEA, Rome, Italy
2CV.1.10 Denoising of Image Data for DWS Wafer Characterization Using Generative Adversarial Networks
L. Kurumundayil, Fraunhofer ISE, Freiburg, Germany
2CV.1.11 Stability Studies and Characterisation of Silicon Solar Cells via In-Situ Temperature and Light Dependent Suns-Voc Measurements
M. Vaqueiro-Contreras, UNSW Australia, Sydney, Australia
2CV.1.12 Impact of Cut Edge Recombination in High Efficiency Solar Cells – Measurement and Mitigation Strategies
N. Chen, ISC Konstanz, Constance, Germany
2CV.1.14 Performance Enhancement of PERC Solar Cell with SiOxNy Back Surface Passivation by Low Temperature Annealing Process
S. Koçak Bütüner, GUNAM, Ankara, Turkey
2CV.1.15 Impact of Light Induced Degradation on the Performance of Atmospheric Cu Contacted PERC Solar Cells
S. Huneycutt, UNC Charlotte, Charlotte, USA
2CV.1.16 Effect of Rear Finger Number on the Performance of Bifacial PERC Si Solar Cells
M. Kaya, Kalyon PV, Ankara, Turkey
2CV.1.17 Progress in the Defect Detection in p-n Junction Isolation by Electroluminescence
E. Cereceda, UPV/EHU, Bilbao, Spain
2CV.1.18 Rethinking Photoluminescence for Understanding Solar Cell Degradation
O. Martínez, UVa, Valladolid, Spain
2CV.1.19 Development and Implementation of a Refined Model for Comprehensive Characterization and Optimization of Highly Efficient Silicon Solar Cells
I.O. Sokolovskyi, NAS ISP, Kyiv, Ukraine
2CV.1.20 Light Trapping in Silicon Nanowire: Correlated Absorption Depth Profile, EM-Field Distribution and Exciton Generation Rate Distribution
M.K. Hossain, KFUPM, Dhahran, Saudi Arabia
2CV.1.21 The Effect Of Doping Profile On Contact Resistivity Between Screen Printed Ag/Al And Implanted Boron Emitter
G. Bektaş, GÜNAM, Ankara, Turkey
2CV.1.22 Selective Emitter Formation via Laser Doping with Picosecond Pulsed Laser for High-Efficiency PERC Solar Cells
S. Koçak Bütüner, GÜNAM, Ankara, Turkey
2CV.1.23 Investigation of the Potential Induced Degradation for PERC Solar Cells
Y.-S. Long, ITRI, Hsinchu, Taiwan
2CV.1.25 Potential End-Use for Silicon Solar Cells Applications with Coated Europium-Based Luminescent Down-Shifters: Enhancement of Performance and Stability
A. Elamri, Mohammed VI Polytechnic University, Benguerir, Morocco
2CV.1.34 Influence of Diamond Wire Sawing Process Variation on Commercial Mono PERC Solar Cell Production Parameters
B. Gümüşs, Kalyon PV, Ankara, Turkey
2CV.1.35 Comparison of Electrical Performances of Fully Ion Implanted n-PERT Solar Cells Made of Different n-Type Wafer Feedstocks
G. Bektaş, GÜNAM, Ankara, Turkey
2CV.1.36 High-Throughput Dry Etching of Polysilicon Layers for TOPCon Solar Cell Production
B. Kafle, Fraunhofer ISE, Freiburg, Germany
2CV.1.37 Texturization of Monocrystalline Silicon by Metal-Assisted Chemical Etching: Analysis of Reaction Dynamics
D.M. Pera, University of Lisbon, Lisbon, Portugal
2CV.1.39 Optimization of Phosphorus Implant Dose and Activation Temperature for Emitter Formation of p-Type Silicon Solar Cells
G. Bektaş, METU, Ankara, Turkey
2CV.1.40 Optimization of Laser Selective Emitter Process for Commercial Mono PERC Solar Cell Production
E. Han, Kalyon PVŞ, Ankara, Turkey
2CV.1.41 Investigation of the Rear Side Passivation Layer on Bifacial PERC Solar Cells
C.-W. Kuo, TSEC, Hsinchu, Taiwan
2CV.1.42 Effect of Surface Morphology on Passivation Quality of AL2O3/SiNx Stack Layer for PERC Solar Cell
S. Koçak Bütüner, GÜNAM, Ankara, Turkey
2CV.1.43 Process Fabrication of Cost-Effective IBC Solar Cells Using APCVD Glass Layers
V. Kuruganti, ISC Konstanz, Konstanz, Germany
2CV.1.44 Contactless Optimization of a Novel, Maskless Patterned Etching Process for Interdigitated Back Contact Cells
M. Ghosh, LPICM-CNRS, Palaiseau, France
2CV.1.45 Evaluation of Indium Oxide as Alternative TCO Material for Silicon Heterojunction Solar Cells
K. Emtsev, R&D Center TFTE, St-Petersburg, Russian Federation
2CV.1.46 Highspeed Video Investigation on the Effect of Rheological Paste Properties on Fine-Line Printing of Silicon Solar Cell Front Side Contacts
K. Abdel Aal, Karlsruhe Institute of Technology, Karlsruhe, Germany
2CV.1.47 Copper Based Front Side Metallization Contacts - Screen Printed and Fired in Air
T. Druffel, Bert Thin Films, Louisville, USA
2CV.1.48 Investigation of Effect of Poly-Si Impurities on Cz-Ingot to Solar Module Production
F. Çambay Kuban, KalyonPV, Ankara, Turkey
2CV.1.49 Investigation of the Current Induced Degradation for Gallium Doped Silicon Solar Cells
Y.-S. Long, ITRI, Hsinchu, Taiwan
2CV.1.50 Sol-Gel Method for Double Layer Coated Colored Silicon Solar Cells
M. Rudzikas, Center for Physical Sciences and Technology, Vilnius, Lithuania
2CV.1.53 Mass Production of Tunnel Oxide Passivated Contacts Silicon Solar Cells
K.-C. Lai, Motech Industries, Tainan City, Taiwan