EU PVSEC Programme Online
EU PVSEC 2021, 6 - 10 September 2021
Session: 4AV.1 PV Module Design, Components and Ageing
Type: Visual
Date: Monday, 6th September 2021
15:15 - 16:45
Event: Conference Conference
Topic: 4. Photovoltaic Modules and BoS Components
4AV.1.1 Degradation of Photovoltaic Backsheets: Study of the Effect of Sample Preparation
L. Garreau-Iles, DuPont, Meyrin, Switzerland
4AV.1.3 Performance and Durability of Tedlar® PVF Based Frontsheets
L. Garreau-Iles, DuPont, Meyrin, Switzerland
4AV.1.4 Solar Heat Blocking Encapsulants to Increase Power Output and Lifetime of Crystalline Silicon PV
D. Mann, BMC, Geleen, Netherlands
4AV.1.5 The Impact of the Lamination Process on the Adhesion Properties at the Glass-Encapsulant Interface and Damp Heat Stability of PV Modules
A.K. Öz, Fraunhofer ISE, Freiburg, Germany
4AV.1.6 Performance Analysis and CTM Simulations of PV Modules with Various Encapsulant Materials
M. Çaliskan, Kalyon PV, Ankara, Turkey
4AV.1.7 PV40+ Project: New Encapsulants and Testing Strategies to Achieve 40 Years of Lifetime
C. Barretta, PCCL, Leoben, Austria
4AV.1.8 Methodology for Evaluating Solar Module Encapsulant Materials
H.-H. Hsieh, ITRI, Hsinchu, Taiwan
4AV.1.9 Qualitative and Semi-Quantitative Analysis of Additives in Encapsulation Materials of PV Modules
S. Neubauer, Fraunhofer CSP, Halle (Saale), Germany
4AV.1.10 Novel Test Methodology for Characterization of Fatigue Delamination Resistance of Glass/Glass Modules on Specimen Level
G. Riedl, Johannes Kepler University Linz, Linz, Austria
4AV.1.11 Stability of Inks Used for Masking Metallic Interconnects in BIPV Modules
A. Borja Block, EPFL, Neuchâtel, Switzerland
4AV.1.12 Three-Dimensional Multi-Ribbon Back-Contact Interconnection: Latest Results on Reliability Testing
R. Van Dyck, KU Leuven, Leuven, Belgium
4AV.1.13 Improved Eddy-Current Probe for Non-Destructive Characterization of Electrical Contacts in PV Modules
L. Neumaier, SAL Silicon Austria Labs, Villach, Austria
4AV.1.15 Shingle Interconnection on HJT Solar Cells: Reliability Study and Upscaling for High Power PV Modules
C. Carrière, CEA, Le Bourget-du-Lac, France
4AV.1.16 Electrically Conductive Adhesive Interconnects: How Low Can You Go?
D. Tune, ISC Konstanz, Constance, Germany
4AV.1.18 Production Process FMEA: Effective Procedure to Detect Major Process Related Reliability Risks and Better Specify Reliable Productions Windows
B. Jäckel, Fraunhofer CSP, Halle (Saale), Germany
4AV.1.19 Advanced Degradation Modelling of Photovoltaic Modules and Materials
K.A. Berger, AIT, Vienna, Austria
4AV.1.20 Accelerated Acid Corrosion Testing of Solar Cells: Test to Failure
A. Fairbrother, EPFL, Neuchâtel, Switzerland
4AV.1.21 Modelling of Degradation Rates and Lifetime Estimations of Backsheets: Hydrolysis
G. Oreski, PCCL, Leoben, Austria
4AV.1.23 Compatibility of Crosslinking Encapsulants with Smart Wire Connection Technology: Ways to Prevent Bubbles Formation
D. Andronikov, R&D Center TFTE, St-Petersburg, Russian Federation
4AV.1.24 Motivation, Benefits, and Challenges for New Photovoltaic Material & Module Developments – Results from IEA PVPS Task 13 Subtask 1.1
G. Oreski, PCCL, Leoben, Austria
4AV.1.25 Hot Cells in High-Power Photovoltaic Modules with Solar Cells from Larger Silicon Wafer Formats
R. Witteck, ISFH, Emmerthal, Germany
4AV.1.26 Approaches for a Lightweight Module with Laminated Materials
M. Heinrich, Fraunhofer ISE, Freiburg, Germany
4AV.1.27 Shingled Solar Module for BIPV Application
J. Zhu, Institute for Energy Technology, Kjeller, Norway
4AV.1.28 Simulation Tool for the Performance Optimization of Colored PV Modules
C. Pfau, Fraunhofer CSP, Halle (Saale), Germany
4AV.1.29 Lightweight Glass-Free Solar Modules Based on Polycarbonate and Fiberglass Protective Sheets
K. Emtsev, R&D Center TFTE, St-Petersburg, Russian Federation
4AV.1.30 Bifacial Gains and Reliability of Different Cell Technologies in Atacama Desert
R. Couderc, CEA, Le Bourget-du-Lac, France
4AV.1.31 412 W Solar Module Using Silicon Heterojunction Cells and Shingle Interconnection
M. Foti, ENEL Green Power, Catania, Italy
4AV.1.33 Origami-Foldable Tessellated Crystalline-Si Solar Cell Module with Metal Textile Connections
Y.H. Sim, KERI, Changwon, Korea, Republic of
4AV.1.35 Crosslinking Kinetics of Photovoltaic Module Encapsulants – Investigation of Selected EVA and POE Grades
B. Adothu, Johannes Kepler University, Linz, Austria
4AV.1.36 PV Module Transportation in Trucks with Two Different Floor Designs
D.P. Vasudevan, IIT Bombay, Mumbai, India