EU PVSEC Programme Online
EU PVSEC 2019, 9 - 13 September 2019, Marseille
Session: 3BV.2 Perovskites Based Photovoltaics / Organic and Dye-Sensitised Devices / Tandems
Type: Visual
Date: Tuesday, 10th September 2019
13:30 - 15:00
Location / Room: Marseille Chanot Convention and Exhibition Centre, Garden Level / Poster Area
Chairperson(s): G. Bardizza, European Commission JRC, Ispra, Italy
Event: Conference Conference
Type(s) of Access:  Conference Registration
Topic: 3. Perovskites, other Non-Silicon-Based Photovoltaics and Multi-Junction Devices
Presentations:
3BV.2.1 Time Dependent Electroluminescence in Planar and Mesoporous Methylammonium Lead Iodide Solar Cells
M.A. Córdoba, National University of Comahue, Neuquén, Argentina
3BV.2.3 Interfaces and Stability in Halide Perovskite Solar Cells
P. Schulz, CNRS, Palaiseau, France
3BV.2.6 Reduced Dimensional Perovskites: In-Situ Investigation of Film Formation and Morphological Studies Affecting the Device Performance
R. Munir, HZB, Berlin, Germany
3BV.2.8 Fabrication of Smooth, Mirror-Like and PbI2-Free Thin Film Perovskite Layers in Ambient Conditions
C. Montes, ITER, Granadilla de Abona, Spain
3BV.2.9 Layer Structure and Pseudo-Halide Perovskite Solar Cells
P.-C.-Y. Chen, National Cheng Kung University, Tainan, Taiwan
3BV.2.10 On the Stability of Planar CH3NH3PbI3 Perovskite Solar Cells Produced on under Ambient Conditions by Using Polymer Encapsulates
L. Ocaña, ITER, Granadilla de Abona, Spain
3BV.2.11 Synthesis and Thermal Stability Analysis of Lead-Free Cs2AgBiBr6 Double Perovskites
T. Burwig, Martin Luther University, Halle (Saale), Germany
3BV.2.12 2D Modeling of MAPbI3-Based Perovskite Solar Cell with Textured Surface
J.-Y. Huang, NTU, Taipei, Taiwan
3BV.2.13 Inorganic-Organic Hybrid Perovskite Solar Cells Using Spinel Cobaltites Based Hole Transport Layers
J. Ge, Martin Luther University, Halle (Saale), Germany
3BV.2.15 Low Temperature Wet Processing of SnO2: High Efficiency Device, Thermal Stability and Scalability Considerations
R. Couderc, CEA, Le Bourget du Lac, France
3BV.2.16 Comparison Study of Optical, Structural and Morphological Properties of CsPbBr3 Thin Films Grown Using Different Vacuum Based Routes
G. Gordillo, National University of Colombia, Bogotá, Colombia
3BV.2.17 Studying the Use of Mixed Binders Made with Epoxy Resin and Collodion for Producing Conductive Inks for the Metallization of Perovskite Solar Cells via Screen Printing Techniques
C. Montes, ITER, Granadilla de Abona, Spain
3BV.2.19 Wet (CBD, Spin-Coating) and Dry (ALD, CVD) Deposition of Tunable Metal Hybrid Perovskites MASnxPb1-x(IxBr1-x)3 and Oxides for Tandem Application
M. Kozolinsky, EDF R&D, Palaiseau, France
3BV.2.20 Efficient and Stable Fully Slot Die Coated Perovskite Solar Cell
F. Nüesch, EMPA, Dubendorf, Switzerland
3BV.2.22 Tailoring the 2D/3D Structure of Perovskite Film for Its Integration on Highly Textured c-Si Bottom Cell
F. Hilt, TOTAL, Paris la Défense, France
3BV.2.23 Optical Perovskite Test for Optimisation of Perovskite Solar Module Encapsulation Procedures
E.P. Booker, CEA, Le Bourget du Lac, France
3BV.2.24 PZN-4.5pt Perovskites Nanoparticles Thin Films for High Light Absorption and Ferrophotovoltaics Application
R. Ndioukane, Assane Seck University, Ziguinchor, Senegal
3BV.2.25 Photovoltaic Properties of PZN-4.5PT Perovskite Nanoparticles Thin Film Deposited on Silicon Nanowires Substrate
R. Ndioukane, UASZ, Ziguinchor, Senegal
3BV.2.26 Investigation of the Reliability of the Perovskite Photovoltaic Module
Z. Tang, Hanergy Thin Film Power, Chengdu, China
3BV.2.27 Structural Properties of Solution Processed FAPbI3 Perovskites Combined with DFT Calculations
K. Sekar, CINVESTAV, Ciudad de Mexico, Mexico
3BV.2.30 Effect of ZnO Seed Layer in Perovskite Solar Cell
M.R. Tripathy, IIT(BHU), Varanasi, India
3BV.2.35 Air-Stable Semi-Transparent Organic Solar Cells Based on Innovative Donor Polymer and Graphene Electrode
F. Ferrazza, eni, Novara, Italy
3BV.2.36 Lifetime of Inkjet Printing OPV Modules for Indoor Applications
H. Alkhatib, Aix Marseille University, Marseille, France
3BV.2.39 Co-Sensitization of Ruthenizer with MOF for Increasing Power Conversion Efficiency in DSSCs
A. Al-Ahmed, KFUPM, Dhahran, Saudi Arabia
3BV.2.41 Highly Efficient Halogen-Free Solvent Processed Large Area Polymer Solar Cell Module Enabled via Molecular Engineering of Copolymers
S. Rasool, KRICT, Daejeon, Korea, Republic of
3BV.2.45 CuGaSe2 / c-Si Tandem Solar Cells with an Optimized CuGaSe2 Co-Evaporation Process
A. Rivalland, IMN, Nantes, France
3BV.2.46 Polymer-Based Rear Side Light Trapping Structures for Silicon-Based Tandem Solar Cells
H. Hauser, Fraunhofer ISE, Freiburg, Germany
3BV.2.47 Atomic Structure of As-Modified Si(100) Surfaces Prepared in CVD Ambience for III-V/Si Tandems
T. Hannappel, Ilmenau University of Technology, Ilmenau, Germany
3BV.2.49 Building Blocks Development for Defect-Free Growth of GaAs on Silicon for Tandem Solar Cells
D. Mencaraglia, CNRS, Gif sur Yvette, France
3BV.2.50 Towards a GaAs/AlGaAs Nanowires-on-Silicon Tandem Solar Cell
A. Fave, INSA Lyon, Villeurbanne, France
3BV.2.51 Composite-Cell Current Matching for Higher Efficiency Tandem Solar Cells
R.N. Kleiman, McMaster University, Hamilton, Canada
3BV.2.53 Optical Characterizations and Modelling of Semitransparent Perovskite Solar Cells for Tandem Applications
E. Raoult, EDF R&D, Palaiseau, France
3BV.2.54 Monolithic Perovskite/Silicon Tandem Solar Cells with Nanocrystalline Silicon Oxide Recombination Junction
E. Lamanna, University of Rome II, Rome, Italy
3BV.2.55 Low Temperature Activation of B Implantation for Si Subcell Fabrication in III-V/Si Tandem Solar Cells
Y.-T. Sun, KTH Royal Institute of Technology, Kista, Sweden
3BV.2.56 Fabrication Procedure of c-Si Tunnel Junction for Tandem Photovoltaic Cells
X. Li, INSA Lyon, Villeurbanne, France
3BV.2.57 CIGS Growth on a III-V/Si(001) Platform: Towards CIGS/Si Tandem Solar Cells
O. Durand, INSA-Rennes, Rennes, France
3BV.2.58 Time-Response Analysis of Perovskite/Silicon Tandem Solar Cells
V. Paraskeva, University of Cyprus, Nicosia, Cyprus
3BV.2.59 Optimization of the Transparent Conductive Adhesive Layer for Two Terminal Multijunction Solar Cells
C. Li, UNSW Australia, Sydney, Australia
3BV.2.60 Designing Carrier Selective Perovskite on Silicon 3T Tandems
J.P. Connolly, CNRS, Gif sur Yvette, France
3BV.2.61 Monolithic CZTS/Si Tandem Cells with MoS2/TCOs Intermediate Contact
C. Malerba, ENEA, Rome, Italy