EU PVSEC Programme Online
EU PVSEC 2019, 9 - 13 September 2019, Marseille
Session: 4AV.2 PV Module Design,Manufacture,Performance and Reliability/Inverters and Balance of System Components/Sustainability and Recycling
Type: Visual
Date: Monday, 9th September 2019
17:00 - 18:30
Location / Room: Marseille Chanot Convention and Exhibition Centre, Garden Level / Poster Area
Chairperson(s): M. de Wild-Scholten, SmartGreenScans, Groet, Netherlands
Event: Conference Conference
Type(s) of Access:  Conference Registration
Topic: 4. Photovoltaic Modules and BoS Components
4AV.2.1 Correlation Analysis of Environmental Variables for Pb Free p-PERC Bifacial c-Si PV Module in Floating and Marine PVs
H.K. Ahn, Konkuk University, Seoul, Korea, Republic of
4AV.2.2 The Development of Moisture Monitoring for Photovoltaic Module
C.-F. Hsieh, ITRI, Hsinchu, Taiwan
4AV.2.3 Characterization and Optimization of an Inline PV Module Flash Tester in Terms of Realistic Bifacial Module Assessment in the Manufacturing Line
L. Neumaier, Silicon Austria Labs, Villach, Austria
4AV.2.4 Power Performance of Bifacial c-Si PV Module at Low Irradiation Environments for Rooftop Applications
H.K. Ahn, Konkuk University, Seoul, Korea, Republic of
4AV.2.5 LED-Based Differential Spectral Responsivity Measurements of PV Modules
H. Sträter, PTB, Braunschweig, Germany
4AV.2.6 Quantitative Analysis of Electroluminescence Imaging of a PV Module with Different Mismatch Levels
J.D. Santos, CIEMAT, Madrid, Spain
4AV.2.8 The Electrochemical Reactions in Crystalline Silicon Solar Modules
H. Yang, Xi'an Jiaotong University, Xi'an, China
4AV.2.9 Statistical EL-Image Evaluation for Describing the Degradation of PV-Modules after a Hailstorm
C. Buerhop-Lutz, HI ERN, Erlangen, Germany
4AV.2.10 In Situ Contactless Phosphor Thermometry of Encapsulated Photovoltaic Devices
Y. Cao, National Physical Laboratory, Teddington, United Kingdom
4AV.2.11 Characterizing the Angular Distribution of an LED-Based Solar Simulator for PV Modules
S. Riechelmann, PTB, Braunschweig, Germany
4AV.2.12 Multiple Linear Regression Model for Evaluation of Indoor and Outdoor Measurements of Chalcopyrite Thin Film Modules
G.A. Farías Basulto, HZB, Berlin, Germany
4AV.2.13 Development of Industrial Automation PLC Based Modeling for PV Module
Y. Ouberri, Abdelmalek Essaadi University, Tetouan, Morocco
4AV.2.14 Making the Most of Module Matrix Measurements - IEC 61853-1
A. Driesse, PV Performance Labs, Freiburg, Germany
4AV.2.15 First Results from a High Precision Indoor & Outdoor PV Module Monitoring Campaign
K. Kiefer, Fraunhofer ISE, Freiburg, Germany
4AV.2.16 Reducing Measurement Uncertainty of Temperature Coefficients
T. Slikker, Eternal Sun, The Hague, Netherlands
4AV.2.17 Highly Accurate Irradiation and Temperature Control for Next-Generation PV Module Characterisation
A. van der Heide, imec vzw, Genk, Belgium
4AV.2.18 Degradation Analysis of PV Module Technologies in a Moderate Subtropical Climate
J. Lopez-Garcia, European Commission JRC, Ispra, Italy
4AV.2.19 Energy Yield Analysis of Bifacial PV Modules: Different Technologies and Configurations
A.M. Gracia Amillo, European Commission JRC, Ispra, Italy
4AV.2.20 Failure Diagnosis on Photovoltaic Modules Using Thermography, Electroluminescence, Rgb and I-V Techniques
S. Gallardo-Saavedra, University of Valladolid, Soria, Spain
4AV.2.21 Evaluation of Tilt Angle Effect on Soiling of PV Modules in Dubai, UAE
O.M. Albadwawi, DEWA, Dubai, United Arab Emirates
4AV.2.22 Investigation on Shunt Severity in PV Modules by Electroluminescence Imaging and Lock-in Thermography
S. Roy, IIT Bombay, Mumbai, India
4AV.2.23 Determination of Temperature Coefficient of Photovoltaic Modules
O. Bazkir, TUBITAK-UME, Kocaeli, Turkey
4AV.2.24 Energy Yield Comparison between Bifacial and Monofacial PV Modules - Real World Measurements in Desert Climate (BWh)
J. Saal, TÜV Rheinland, Cologne, Germany
4AV.2.25 Real Condition Characterization of Five Photovoltaic Technologies: What Is the Impact of the Environment?
A. Migan-Dubois, GeePs, Gif-sur-Yvette, France
4AV.2.26 Dozens of GWp with Structured Ribbons, Films, Multiwire and No Robust Method for Angular Response Characterization: New Hemispheric IAM (HIAM) Test for an IEC 61853-2 Amendment
M. Falsini, Firenze, Italy
4AV.2.27 Angular Response Measurement of Thin-Film PV Modules with Solar Simulators
W. Herrmann, TÜV Rheinland Energy, Cologne, Germany
4AV.2.28 Quantitative Electroluminescence Imaging of PV Modules: Low-Frequency Blur Removal
K.G. Bedrich, SERIS, Singapore, Singapore
4AV.2.29 Temperature Reduction in Infinite Photovoltaic Solar Arrays
A. Glick, Portland State University, Portland, USA
4AV.2.30 In-Depth Degradation Analysis of Polyamide-Based Backsheets in Fielded Modules under Different Climates
X. Gu, NIST, Gaithersburg, USA
4AV.2.31 Effect of Curing Temperature on Properties of Ethylene Vinyl Acetate (EVA) Used for Crystalline Silicon Solar Module Encapsulation
B. Adothu, IIT Bombay, Mumbai, India
4AV.2.32 PV Module Index: How to Identify the Most Reliable, Highest Performing, Quality Product
C. Kedir, Renewable Energy Test Center, Fremont, USA
4AV.2.33 A Study on the Relationship Between Factors Affecting Peel Strength and Efficiency in Half Cell Multi-Wires Photovolatics Module
S.H. Kim, KETI, Seongnam, Korea, Republic of
4AV.2.34 New PV System Concept - Wireless PV Module Prototype
F.P. Baumgartner, ZHAW, Winterthur, Switzerland
4AV.2.36 Validated Testing of Grid-Connected PV Inverters for LV Grids by Means of Controller-Hardware-in-the-Loop (CHIL) Setup
G. Lauss, AIT, Vienna, Austria
4AV.2.37 Operating Temperature Development of Overcommitted Inverters
U. Muntwyler, BUAS, Burgdorf, Switzerland
4AV.2.38 Converter Based PV-Emulator Using Artificial Neural Network Control Strategy
A.K. Vidal de Oliveira, UFSC, Florianópolis, Brazil
4AV.2.39 PV Connectors a Crucial Part of the Reliability of PV Installations – Computer-Tomography (CT) as a Promising Method to Detect Cross Connections of PV Connectors
U. Muntwyler, BUAS, Burgdorf, Switzerland
4AV.2.46 Technological and Ecological Assessment of Concepts for Sustainable Photovoltaics
G. Oreski, PCCL, Leoben, Austria
4AV.2.47 Ecological Footprint of PV Electricity: Influence of Waste Management, Degradation and Lifetime
K.-A. Weiß, Fraunhofer ISE, Freiburg, Germany
4AV.2.48 Sustainability Performance of Industrial Scale Heterojunction Technology (HJT) for Solar Photovoltaics (PV): Using Life Cycle Assessment (LCA) Methods to Assess Environmental and Social Impacts and Benefits of the AMPERE Project
D. Reid, ERM, Oxford, United Kingdom
4AV.2.49 A Parameterized Model for the Estimation of Life-Cycle Environmental Impacts of Crystalline PV Systems
P. Perez-Lopez, MINES ParisTech, Sophia Antipolis, France
4AV.2.50 Update of the Projection of the Photovoltaic Waste in Spain until 2050
J.D. Santos, CIEMAT, Madrid, Spain
4AV.2.51 A Simple Method for Rapid Recycling of Silver from Decommissioned Silicon Photovoltaics
R. Deng, UNSW Australia, Sydney, Australia
4AV.2.52 An Universal Recycling Technology for Thin Film and Silicon Based Photovoltaic Modules as an Example for Circular Economy
W. Palitzsch, Loser Chemie, Freiberg, Germany
4AV.2.53 Recycling Process of c-Si Photovoltaic Modules by Chemical and Thermal Operations
S. Paneliya, PDP University, Gujarat, India
4AV.2.54 Electrochemical Method for Silicon Photovoltaic Module Recycling
J.W. Ko, Korea University, Seoul, Korea, Republic of
4AV.2.55 Innovative Recycling of End of Life Silicon PV Panels: Materials Recovering and Glass Re-Use
C. Audoin, CEA, Grenoble, France
4AV.2.56 Environmental and Social Impact Assessment of High-Efficient Double Side Contacted Cells with Innovative Carrier Selective Contacts
C. Poulopoulos, ERM, London, United Kingdom
4AV.2.57 Measuring the Incidence Angle Modifier of Optically Uncoupled Glass for PV Application
M. Volk, Cologne University of Applied Sciences, Cologne, Germany
4AV.2.58 Investigation of State Change of Finger Metallization due to Corrosion in Crystalline Silicon Photovoltaic Module
T. Semba, NAMICS Corporation, Niigata City, Japan