EU PVSEC Programme Online
EU PVSEC 2019, 9 - 13 September 2019, Marseille
Session: 4AV.1 PV Module Design, Manufacture, Performance and Reliability (I)
Type: Visual
Date: Monday, 9th September 2019
15:15 - 16:45
Location / Room: Marseille Chanot Convention and Exhibition Centre, Garden Level / Poster Area
Chairperson(s): U. Jahn, TÜV Rheinland Energy, Köln, Germany
R. Gottschalg, Fraunhofer CSP, Halle (Saale), Germany
Event: Conference Conference
Type(s) of Access:  Conference Registration
Topic: 4. Photovoltaic Modules and BoS Components
Presentations:
4AV.1.3 Corrosion Mechanism of Anodized PV Frame in the Accelerated Salt Spray Test
H.-H. Hsieh, ITRI, Hsinchu, Taiwan
4AV.1.4 Power Stabilization of Crystalline PV Modules
R. Ebner, AIT, Vienna, Austria
4AV.1.5 Measurement of Water Vapor Transmission Rate of PV Backsheet with Highly Accelerated Stress Test
C.-F. Hsieh, ITRI, Hsinchu, Taiwan
4AV.1.6 Experimental Benchmarking of Partial Shading Effect on Thin-Film and Crystalline-Silicon Solar Photovoltaic Modules
K.A.K. Niazi, Aalborg University, Aalborg, Denmark
4AV.1.7 Optimization and Design Issues of Bifacial PV Modules and Systems
W. Mühleisen, Silicon Austria Labs, Villach, Austria
4AV.1.8 Accelerated TC Test in Comparison with Standard TC Test for PV Modules with Ribbon, Wire and Shingle Interconnection
C.H. Schiller, Fraunhofer ISE, Freiburg, Germany
4AV.1.9 The Analysis of Electrical Characteristics of Separated Solar Cell by Laser Scribing for High Performance Shingled PV Module
Y.-J. Kim, Shinsung E&G, Jeungpyeong-gun, Korea, Republic of
4AV.1.10 Contributing to the Quality of PV Solar Modules in West Africa
N. Wyrsch, EPFL, Neuchâtel, Switzerland
4AV.1.12 Optimisation of Bifacial Photovoltics Module with Reflective Layer in Outdoor Performance
E. Sng, REC Solar, Singapore, Singapore
4AV.1.13 Preliminary Examination of the Energy Gain of a Bifacial Glass-Glass Module by Applying a Light-Directing Foil
M. Zauner, SAL Silicon Austria Labs, Villach, Austria et al.
4AV.1.14 Investigating Partial Shadowing of PV Modules at Solar Cell Level
L. Feng, University of Applied Sciences Bielefeld, Minden, Germany
4AV.1.15 Differential Scanning Calorimetry for Simulation and Optimization of the Lamination Process
C. Herzog, Fraunhofer ISE, Freiburg, Germany
4AV.1.16 Additive Analysis in Encapsulant Materials and Correlation to Encapsulant Degradation Modes
C. Barretta, PCCL, Leoben, Austria
4AV.1.17 Parallel Natural Weathering of Laminated Backsheets Across Europe
L. Castillon, PCCL, Leoben, Austria
4AV.1.18 Assessment and Evolution of Initial PERC Module Degradation Using Light Induced Degradation, Carrier Induced Degradation and Outdoor Exposure Tests
J. Dupuis, EDF R&D, Moret Loing et Orvanne, France
4AV.1.19 Influence on the CASS Testing for Module Materials
C.-W. Kuo, TSEC, Hsinchu, Taiwan
4AV.1.20 Techno-Economic Analysis of Half-Cell Modules - The Impact of Half-Cells on Module Power and Costs
M. Mittag, Fraunhofer ISE, Freiburg, Germany
4AV.1.22 Mechanical Stability of Semi-Flexible Solar Panels
S. Yakovlev, R&D Center TFTE, St. Petersburg, Russian Federation
4AV.1.23 Determination of Depth-Dependent Variations in the Degree of Crosslinking of EVA due to Changing Lamination Parameters Using Raman Spectroscopy
L. Neumaier, SAL, Villach, Austria
4AV.1.24 Direct Measurement of Moisture Ingress in PV Laminates
N. Kyranaki, CREST, Loughborough, United Kingdom
4AV.1.25 Analysis of Drivers for PV-Material Yellowing Upon Artificial Ageing
Y. Voronko, OFI, Vienna, Austria
4AV.1.26 Pathways of Uncertainties in Service Lifetime Prediction (SLP) Models for PV Modules: How to Improve the Accuracy?
I. Kaaya, Fraunhofer ISE, Freiburg, Germany
4AV.1.27 Characterisation of the Reverse DC Resistance due to Potential Induced Degradation (PID) in Crystalline PV Cells
A. Livera, University of Cyprus, Nicosia, Cyprus
4AV.1.28 Qualification of Polyolefin Backsheet for PV Modules
P. Gebhardt, Fraunhofer ISE, Freiburg, Germany
4AV.1.29 Impact of Highly Breathable Polyolefin Backsheet on EVA Yellowing
P. Gebhardt, Fraunhofer ISE, Freiburg, Germany
4AV.1.30 Performance and Reliability of Bifacial Modules Using a Transparent Backsheet
W.J. Gambogi, DuPont, Wilmington, USA
4AV.1.31 H2020: Solar Train MSCA Fellowship Combined Effect of UV, Temperature and Humidity on Mono-Crystalline Mini-Modules Ageing Using UV LED Lamps at Specific Wavelengths
A. Nairi, CENER, Sarriguren-Navarra, Spain
4AV.1.32 Artificial Soiling Testing and Performance Determination of Functional Coatings
E. Klimm, Fraunhofer ISE, Freiburg, Germany et al.
4AV.1.33 The Effect of Shadows from People and Cleaning Tools on the STC Power of CIGS Thin-Film PV Modules
M. Kitze, Avancis, Torgau, Germany
4AV.1.34 Measuring and Modelling the Generation of Acetic Acid in Aged Ethylene-Vinyl Acetate-Based Encapsulants Used in Solar Modules
L. Gnocchi, EPFL, Neuchâtel, Switzerland
4AV.1.36 Investigation of Stabilization Procedures for Power Determination of Thin-Film Modules
T. Weber, PI Berlin, Berlin, Germany
4AV.1.37 Development of Ultra-Accelerated Ageing Tests for Improved Reliability and Durability of Bifacial Photovoltaic Modules in Harsh Desert Conditions
J.-F. Lelièvre, CEA, Le Bourget du Lac, France
4AV.1.38 Influence of Large Periods of DC Current Injection in c-Si Photovoltaic Panels
A. Moreton-Fernandez, University of Valladolid, Valladolid, Spain
4AV.1.39 Light Management Coatings for Solar Modules by Large-Area Nanoimprinting
L.W. Veldhuizen, Morphotonics, Veldhoven, Netherlands
4AV.1.40 Optimising SHJ Solar Cell Bifaciality towards a Monolithic Module Architecture
J. Eymard, CEA, Le Bourget du Lac, France
4AV.1.41 Coupled Multi-Physics Model for Simulating Thermal Behavior, Electrical Yield and Structural Reliability of Monofacial and Bifacial Photovoltaic Modules under Desert Environment
S. Ahzi, QEERI, Doha, Qatar
4AV.1.42 Numerical and Experimental Investigations on the Effect of Different Frame and Mounting Configurations of PV Modules for Crack Propagation and Degradation
L. Papargyri, University of Cyprus, Nicosia, Cyprus
4AV.1.45 One Step towards General Mathematical Formulation of Shading Tolerability for Photovoltaic Modules
H. Ziar, Delft University of Technology, Delft, Netherlands
4AV.1.46 Acceptable Volume of Investment for “Combined Stress Testing”
T. Tanahashi, AIST, Tsukuba, Japan
4AV.1.47 Superhydrophillic Self Cleaning SiO2/TiO2 Thin Film Coating for Solar Glass Cover Application
A. Abhinav, IIT Bombay, Mumbai, India
4AV.1.48 Cell Strength Test in Laminates – Findings and Practical Relevance
M. Pander, Fraunhofer CSP, Halle (Saale), Germany
4AV.1.49 Development of Conductive Backsheet for Manufacture of PV Modules with Back-Contact Cells
G.J.W. Meijers, DSM, Geleen, Netherlands
4AV.1.50 Improvements in Energy Yield and Financial Benefits for Next-Generation DSM AR Coatings
P. Pasmans, DSM, Geleen, Netherlands
4AV.1.51 Laser-Assisted Bonding (LAB) and Hybrid Underfill Technology for Module Fabrication Based on Silicon Back Contact Solar Cell
J. Joo, ETRI, Daejeon, Korea, Republic of
4AV.1.54 Influences of Different Backsheet on PV Module Reliability and Durability in High Humidity Environment for the EU PVSEC 2019
H. Gong, Suntech Power, Wuxi, China
4AV.1.55 Numerical Model of PV Module Mechanical Behaviour and Experimental Validation
E. Boyère, EDF R&D, Moret Loing et Orvanne, France
4AV.1.56 Perfromance Degradation of Solar Modules for Solar Roadways
J.H. Kim, DGIST, Daegu, Korea, Republic of
4AV.1.58 From Degradation Kinetics in PV Modules to Residual Lifetime Prognostics
H. Hieber, ICR, Weimar, Germany
4AV.1.59 Numerical Calculation for Internal Heat Flow through Applying a Heat Dissipation Structure to the Rear Side of PERC Solar Module
S.H. Jung, GERI, Gumi, Korea, Republic of
4AV.1.60 Failure Mechanisms in PID "Resistant" PV Modules Under Enhanced Environmental Humidity and Soiling Stress
K. Ilse, Fraunhofer CSP, Halle (Saale), Germany
4AV.1.61 Comprehensive Study of PID Mechanisms for n-Type Bifacial Solar Cells
I. Devoto, ISC Konstanz, Konstanz, Germany