EU PVSEC Programme Online
35th EU PVSEC 2018, 24 - 28 September 2018, Brussels
Session: 1CV.4 Fundamental Studies / New Materials and Concepts for Photovoltaic Devices
Type: Visual
Date: Wednesday, 26th September 2018
17:00 - 18:30
Location / Room: SQUARE - Brussels Meeting Centre Level -2 / Grand Hall
Chairperson(s): J. Poortmans, imec, Leuven, Belgium
L.C. Hirst, University of Cambridge, Cambridge, United Kingdom
Event: Conference Conference
Type(s) of Access:  Conference Registration
Topic: 1. New Materials and Concepts for Photovoltaic Devices
1CV.4.1 Modeling of the Outdoor Operating Temperature of Polycrystalline Photovoltaic Module. Case Study: Harsh Climatic Conditions of Benguerir City, Morocco
C. Hajjaj, IRESEN, Rabat, Morocco
1CV.4.2 Approach for Simulating Outputs of PV Module/Array of Different Technologies with High Accuracy
S. Kichou, CTU, Bustehrad, Czech Republic
1CV.4.3 Comprehensive Approach to Accurate Albedo Modelling and Simulation for Solar Engineering Applications
H. Ziar, Delft University of Technology, Delft, Netherlands
1CV.4.5 SLALOM: Open-Source, Portable and Easy-to-Use Solar Cell Optimizer. Application to the Design of InGaN and CZTS Solar Cells
S. Ould Saad Hamady, Université de Lorraine, Metz, France
1CV.4.6 A Planar Indium-Tin-Oxide Thermophotovoltaic Emitter with High-Temperature Verification
P. Parashar, NCTU, Hsinchu, Taiwan
1CV.4.7 Rapid Calculation of the Backsheet Coupling Gain Using Ray Groups
A. Pfreundt, Fraunhofer ISE, Freiburg, Germany
1CV.4.8 Generalized Reciprocity Relation in p-i-n Junction Solar Cells
K. Toprasertpong, University of Tokyo, Tokyo, Japan
1CV.4.9 Simulations of Some Effects of Grain Boundaries in Solar Cells
T.O. Saetre, University of Agder, Grimstad, Norway
1CV.4.13 Evaluating the Potential of Optical Materials as Solar Cell Absorbers
B. Dzurnak, CTU, Prague, Czech Republic
1CV.4.14 Surface Defect Spectroscopy of Transparent Conductive Oxides
E. Horynova, CTU, Prague, Czech Republic
1CV.4.15 Multiphysics Modeling and Optimization of the Induction Heating Process for Germanium Crystal Growth
D. Ouadjaout, CRTSE, Algiers, Algeria
1CV.4.16 Quantifying Minority Carrier Lifetime and Collection Efficiency of Solar Cells by Combined Optical and Electrical Characterisation Techniques
V. Tsai, Loughborough University, Loughborough, United Kingdom
1CV.4.18 Enhanced CVD-Graphene Sheet Transfer on a Zinc Oxide Ultrathin Film Using Wet Transfer Method for Solar Cell Application
A.F. Abdelaal, KFUPM, Dhahran, Saudi Arabia
1CV.4.19 Enhanced Performance of a Graphene/n-GaAs Schottky Barrier Solar Cell by Means of a AlGaAs/GaAs Thin Multi-Quantum Well Layer
A.C. Varonides, University of Scranton, Scranton, USA
1CV.4.26 Optimal Band Gap Energies for Two-Step Photon Up-Conversion Solar Cells with Partial Absorptivity
Y. Harada, Kobe University, Kobe, Japan
1CV.4.27 Interfacial Buffer Layer for the Integration in SWCNTS/A-SI:H Hybrid Thin Films Solar Cells
H. Meddeb, DLR, Oldenburg, Germany
1CV.4.29 Advanced Silver Paste Formulation for High Efficiency Silicon Solar Cells
C. Yüce, Karlsruhe Institute of Technology, Karlsruhe, Germany
1CV.4.30 Rare Earth Doped Compounds for Enhancing the Efficiency of Silicon Building Integrated Concentrator PV via Spectral Conversion
J. Day, University of Exeter, Penryn, United Kingdom
1CV.4.31 Thick Films of CY:PMMA as a Luminescent Solar Concentrator for Photovoltaic Windows
M. Jobin, HES-SO, Geneva, Switzerland
1CV.4.32 Efficient Light Collection via Dielectric Nanoparticles in Ultrathin Cu(In⁠,Ga⁠)Se⁠2 Solar Cells and Modules
M. Schmid, University of Duisburg-Essen, Duisburg, Germany
1CV.4.33 Application of Reduced Graphene Oxide (rGO) on a-Si: H Solar Cell for Performance Enhancement
A. Nandi, IIEST Shibpur, Howrah, India
1CV.4.34 Optical and Structural, Properties of Zinc Sulfide Doped Chromium Thin Films Prepared by RF-Sputtering
M. Chaik, Cadi Ayyad University, Marrakech, Morocco
1CV.4.36 Synthesis, Structural and Photo Physical Properties of Perovskite Oxide (KNbO3)1-x+(La2NiMnO6)x for Photovoltaic Application
M.S. Sheikh, Bose Institute, Kolkata, India
1CV.4.37 Silicon Nanowire for Solar Energy Application
B. Salhi, KFUPM, Dhahran, Saudi Arabia
1CV.4.38 Optimization of Technology for Creation of Composite Antireflection Coatings for Silicon Solar Cells
S.X. Suleymanov, Academy of Sciences of Uzbekistan, Tashkent, Uzbekistan
1CV.4.40 Reduced Operating Temperature to Improve Durability and Efficiency of Solar Modules
J. Jiang, UNSW Australia, Sydney, Australia et al.
1CV.4.41 Effect of Annealing Process on Crystalline Silicon Solar Cells with Down-Conversion SiNx::Tb3+ - Yb3+ Films
Y.-C. Lee, NDHU, Hualien, Taiwan
1CV.4.42 Characterization of a Novel Photovoltaic Backsheet Based on Polyamide-Ionomer Technology
C. Thellen, Tomark-Worthen, Nashua, USA
1CV.4.43 Growth and Characterization of (ZnSe)0.1(SnSe)0.9 Films for Use in Thin Film Solar Cells
E. Artegiani, University of Verona, Verona, Italy
1CV.4.45 Effect of Co and Cr Doping on the Optical Band Gap of ZnTe
M. Chaik, Cadi Ayyad University, Marrakech, Morocco
1CV.4.48 Precursor Compositions Effect on the Photovoltaic Performance of Non-Vacuum Proceed CuSbS2 Solar Cells and Its Defect Properties
A. Cho, KIER, Daejeon, Korea, Republic of
1CV.4.50 The Research of the Al2O3 Passivation Layer in Sb2Se3 Thin Film Solar Cells
C. Ma, Changzhou University, Changzhou, China
1CV.4.51 Nanosphere Colloidal Coating for Improvement of Solar Cell Efficiency
N. Avishan, METU, Ankara, Turkey
1CV.4.52 Spectrally Selective Solar Cells for Simultaneous Use of Photosynthesis and Photovoltaics
N. Osterthun, DLR, Oldenburg, Germany
1CV.4.53 Electron Selective La:BaSnO3 Thin Films via Pulsed Laser Deposition (PLD) : Effect of Deposition Pressure
A. Kumar, IIT Bombay, Mumbai, India
1CV.4.54 Studying Transition Metal Doped In2S3 by Means of Hybrid Density-Functional Theory
E. Ghorbani, Technical University, Darmstadt, Germany
1CV.4.55 Optical and Compositional Properties of ALD Grown TiOx
O. Akdemir, METU, Ankara, Turkey
1CV.4.56 Integration of Flexible Solar Cells in Plastic and Composite Materials
S. Kristensen, Avans University of Applied Sience, 's-Hertogenbosch, Netherlands
1CV.4.57 Reliability of Electrically Conductive Adhesives
G. Oreski, PCCL, Leoben, Austria
1CV.4.58 Hole Transport Transparent Conductive Oxide: Towards Dopant Free Si-Based Solar Cells
O. Akdemir, METU, Ankara, Turkey
1CV.4.59 Sputter-Deposited CuGaO2 as a Hole Conductor for Transparent Recombination Junctions for Methylammonium-Pb-Halide Tandem Solar Cells
R. Wenisch, HZB, Berlin, Germany
1CV.4.60 Evaluation of Different Module Designs and Determination of Different Physical Loss Mechanisms by Means of a Practical Multi-Physic Model
H. Hanifi, Fraunhofer CSP, Halle (Saale), Germany
1CV.4.62 Influence of Ni Doping on the Optical and Structural Properties of CuO Thin Films Deposited by RF Sputtering
H. El Aakib, Cadi Ayyad University, Marrakech, Morocco
1CV.4.63 CsSnI3-xClx Based Metal Halide for the Near IR Absorption Perovskite Solar Cells
M.-H. Jung, Sejong University, Seoul, Korea, Republic of
1CV.4.64 Enhanced Module Efficiency by Application of High Reflection White EVA
A. Hoffmann, GLAAST, Bensheim, Germany
1CV.4.65 Coating Paper with Paper. A Planarization Strategy towards Efficient Silicon Thin Film Solar Cells to Power Optoelectronic Devices
M.P. Ferreira, New University of Lisbon, Caparica, Portugal
1CV.4.69 Si with Self Organized Quasiperiodical Microrelief for Plasmonic Solar Cells
S.V. Mamykin, NAS, Kiev, Ukraine
1CV.4.70 Application of Taguchi Approach to Optimize the Spray Pyrolysis Process of the Quaternary CuInxGa(1-x)(Se,S)2 with Good Optical Properties
A. Bouich, University of Hassan II, Casablanca, Morocco
1CV.4.72 Electronic Properties of Twist-Angle Interlayer of WSe2/MoSe2 Heterostructure
N.D. Cong, Sejong University, Seoul, Korea, Republic of
1CV.4.74 ZnO Based Nanostructures Fabricating by Chemical Bath Deposition for Dye-Sensitized Solar Cell Application
C. Li, Kochi University of Technology, Kami, Japan
1CV.4.75 Innovative Solar Spectral Beam Splitting Concepts: Cogeneration and Photochemistry
G. Mittelman, Agricultural Research Organization, Rishon Lezion, Israel
1CV.4.76 Ultra-Fast Plasmonic Ag NPs Production for Light Trapping in Thin Si Solar Cells
H. Águas, New University of Lisbon, Caparica, Portugal
1CV.4.78 Inorganic Cesium Carbonate Electron Transport Layer for High Efficiency Perovskite Solar Cells
M.I. Hossain, QEERI, Doha, Qatar
1CV.4.80 Solar Cell Embedded Textile Yarn
A. Satharasinghe, Nottingham Trent University, Nottingham, United Kingdom
1CV.4.81 Development of High Efficiency Multi-PERC Bifacial Cells and Modules
F. Jiang, Canadian Solar, Suzhou, China
1CV.4.82 Photovolataic Driven Solar Fuel Generation Using Chalcogenide Materials
H. Cho, Sungkyunkwan University, Suwon-City, Korea, Republic of
1CV.4.83 Solder Joint Analysis of Tin-Lead and Bismuth Based Lead Free PV Ribbons in High Throughput Manufacturing
N.S. Pujari, Alpha Assembly Solutions, Bangalore, India
1CV.4.84 Investigation of Phonon Dynamic in Single Crystal Lead-Halide Perovskites by Inelastic Neutron Scattering (INS)
M. Dubajic, UNSW Australia, Sydney, Australia