EU PVSEC Programme Online
35th EU PVSEC 2018, 24 - 28 September 2018, Brussels
Session: 3BV.3 Perovskite, Organic and Dye-Sensitised Devices
Type: Visual
Date: Tuesday, 25th September 2018
15:15 - 16:45
Location / Room: SQUARE - Brussels Meeting Centre Level -2 / Grand Hall
Chairperson(s): S.C. Veenstra, ECN part of TNO, Eindhoven, Netherlands
C. Camus, ZAE Bayern, Erlangen, Germany
Event: Conference Conference
Type(s) of Access:  Conference Registration
Topic: 3. Non Silicon-Based Thin Film Photovoltaics
Presentations:
3BV.3.1 Evaluation Emerging PV Performance under Energy Harvesting for IOT (Internet of Things) Applications
C.-F. Hsieh, ITRI, Hsinchu, Taiwan
3BV.3.3 Quantitative Assessment of Humidity in Encapsulation Materials for Moisture-Sensitive Devices
C. Camus, ZAE Bayern, Erlangen, Germany
3BV.3.4 Indoor Calibration of Large Area Organic PV Modules
G. Bardizza, European Commission JRC, Ispra, Italy
3BV.3.5 Toward High Performance Organic Solar Cells: Development of Materials
H.J. Son, KIST, Seoul, Korea, Republic of
3BV.3.6 Investigations of Antireflective Coatings for Organic Solar Cells
S.X. Suleymanov, Academy of Sciences of Uzbekistan, Tashkent, Uzbekistan
3BV.3.8 Bifacial Dye Sensitized Solar Cell Prototyped Using Carbon Fibre Mesh as Counterelectrode
M. Gheorghe, NANOM MEMS, Rasnov, Romania
3BV.3.9 Improvement of Light Harvesting with a Multi-Resonance Tandem Geometry in Thin-Film Solar Cells
B. Godefroid, Free University of Brussels, Brussels, Belgium
3BV.3.11 Lead Sulfide Nanocrystal Co-Sensitized Dye-Sensitized Solar Cell: Scalable Deposition Process and Significant Improvement in Power Conversion Efficacy
A. Al-Ahmed, KFUPM, Dhahran, Saudi Arabia
3BV.3.12 3-Dimensional Dye Sensitized Solar Cell Sub-Module with Oblique Angled Cell Array for Enhanced Power and Energy Density Output Utilizing Non-Linear Relation in Cosine Law of Light Incident Angle
M.J. Yun, KERI, Changwon, Korea, Republic of et al.
3BV.3.13 Solution Grown (100)pc Oriented BiFeO3 Thin Films: Photoconductivity and Ferroelectric Studies
S. Nandy, IIT Madras, Chennai, India
3BV.3.14 Simple and Dopant-Free Hole-Transporting Material Based on Carbazole for Efficient Planar Perovskite Solar Cells:N,N-di-p-methoxyphenylamine-substituted(2-Ethylhexyl)-9H-Carbazole and N,N-di-p-methylthiophenylamine-substituted (2-Ethylhexyl)-9H-Carbazole
J. Zhang, Changzhou University, Changzhou, China
3BV.3.15 Investigation of Flash-Lamp Annealing and Investigation of Hole-Extraction at Graphene Interface by Modulated Surface Photovoltage Spectroscopy for MAPbI3 Thin-Films
S.H.B. Vinoth Kumar, Berlin University of Technology, Berlin, Germany
3BV.3.16 Fully Inorganic Charge Transport Layers for High Efficiency Perovskite Solar Cells and Modules
A. Walter, CSEM, Neuchâtel, Switzerland
3BV.3.17 Low-Temperature Electron Transport Layers for Perovskite Solar Cells
P. Delli Veneri, ENEA, Portici, Italy
3BV.3.18 The Effect of Potassium Doping on Perovskite Solar Cells Performance and Stability
M.F. Vildanova, RAS, Moscow, Russian Federation
3BV.3.19 Growth of Compact CH3NH3PbI3 Thin Films Controlled by Ligand Chemistry
J. Jiang, Changzhou University, Changzhou, China
3BV.3.23 Enhancing the High Efficiency of Perovskite Solar Cell Using TiO2 Nanorod as Effective Electron Transfer Layer
M. Kim, KIER, Ulsan, Korea, Republic of
3BV.3.25 The Impact of Time on Efficiency Variation of CH3NH3PbI3 Perovskite Solar Cells via Sandwich Deposition Technique
C.-H. Kuan, NTU, Taipei, Taiwan et al.
3BV.3.26 Perovskite Solar Cells Prepared by 3-Step Method Using Additional CH3NH3I or HC(NH2)2I Spin-Coating: Multiple Bandgap Structure for Efficiency Improvement
Y. Okamoto, University of Tsukuba, Tsukuba, Japan
3BV.3.27 Fabrication of High Efficiency Single Halide Lead Perovskite Solar Cells by Sandwich Deposition Technique
T. Avula, NTU, Taipei, Taiwan et al.
3BV.3.28 Improving Carrier Transport Ability to Enhance Sandwich Deposition Technique Synthesized CH3NH3PbI3-xClx Perovskite Solar Cells
P.-T. Kuo, NTU, Taipei, Taiwan et al.
3BV.3.29 Coevaporation of Methylammonium Lead Iodide Perovskites Absorbers and Their Optical and Structural Properties
T. Gallet, University of Luxembourg, Luxembourg, Luxembourg
3BV.3.30 Perovskite Solar Cells with Sulfide-Based Interlayer
M.F. Vildanova, RAS, Moscow, Russian Federation
3BV.3.31 Design of High-Performance Perovskite Solar Cells Adapted to the Tandem Concept and Suitable to Harsh Climates
S. Laalioui, IRESEN, Rabat, Morocco
3BV.3.32 Simulation Study of Tandems of Perovskite and IBC c-Si Solar Cells
S. Silvestre, UPC, Barcelona, Spain
3BV.3.34 Exploring the Use of Collodion as a Binder in Screen Printing Vehicles for Perovskite Solar Cells Metallization
C. Montes, ITER, Granadilla de Abona, Spain
3BV.3.35 Innovative Intermitent Coating Techniques in the R2R Manufacturing of Perovskite Solar Cells and Nano-Imprint Structuring for Efficiency Optimization
T. Exlager, Coatema, Dormagen, Germany
3BV.3.36 Producing Uniform and Smooth Thin Layers of Perovskite under Ambient Conditions by Adjusting to the Existing Levels of Moisture
C. Montes, ITER, Granadilla de Abona, Spain
3BV.3.37 Optimization of Three-Terminal Perovskite / c-Si Tandem Solar Cells
R. Santbergen, Delft University of Technology, Delft, Netherlands
3BV.3.38 Preparation of Large Area Perovskite Solar Cells Modules by Industrial Methods
S. Wang, Changzhou University, Changzhou, China
3BV.3.40 Improved Performance and Stability of Organo-Halide MAPbI3-xClx Perovskite Solar Cell by Grain Boundary Modification with CsPb(BrI)3 Quantum Dots
D. Ghosh, IISER, Kolkata, India
3BV.3.41 Designation of a Novel and Highly Stable Lead-Free Cs2NaBiI6 Double Perovskite for Photovoltaic Application
T. Ma, Institute of Technology, Kitakyushu, Japan
3BV.3.42 Highly Efficient and ITO-Free Flexible Counter Electrodes Employing Novel Copper Based Redox Shuttles in Dye-Sensitized Solar Cells
S.G. Hashmi, Aalto University, Espoo, Finland
3BV.3.43 First Long-Term Stability Test for Carbon Based Printed Perovskite Solar Cells in Harsh Nordic Conditions
S.G. Hashmi, Aalto University, Espoo, Finland
3BV.3.45 Investigating the Optimum Optical Spacer on the Performance of 4-Terminal Perovskite/Silicon Tandem Solar Cell
A.T. Hajjiah, Kuwait University, Khaldiya, Kuwait
3BV.3.46 Semitransparent Organic Solar Cells from a Transparent Conductive Polymer Electrode
M.H. Kang, Keimyung University, Daegu, Korea, Republic of
3BV.3.47 Improving Efficiency of CH3NH3PbI3 Perovskite Solar Cells by Co-Doping H2O and Potassium Halide in PbI2 Buffer Layer
Y.-W. Hsiao, National Cheng Kung University, Tainan, Taiwan